Bộ xử lý CPU IC693CPU364

Thông số kỹ thuật GE Fanuc IC693CPU364

CPU Type Single slot CPU module with embedded Ethernet Interface
Total Baseplates per System 8 (CPU baseplate + 7 expansion and/or remote)
Load Required from Power Supply 1.51 Amps from +5 VDC supply
Processor Speed 25 MegaHertz
Processor Type 80386EX
Ethernet fuse, replaceable 2.69×2.69×6.1 mm, 125V, 1A, slow acting
Operating temperature 0 to 60 degrees C (32 to 140 degrees F) ambient
Typical Scan Rate 0.22 milliseconds per 1K of logic (boolean contacts)
User Memory (total) 240K Bytes. Note: Actual size of available user program memory depends on the amounts configured for %R, %AI, and %AQ configurable word memory types (see below).
Discrete Input Points – %I 2,048
Discrete Output Points – %Q 2,048
Discrete Global Memory – %G 1,280 bits
Internal Coils – %M 4,096 bits
Output (Temporary) Coils – %T 256 bits
System Status References – %S 128 bits (%S, %SA, %SB, %SC – 32 bits each)
Register Memory – %R Configurable in 128 word increments from 128 to 16,384 words with Logicmaster and from 128 to 32,640 words with Control version 2.2.
Analog Inputs – %AI Configurable in 128 word increments from 128 to 16,384 words with Logicmaster and from 128 to 32,640 words with Control version 2.2.
Analog Outputs – %AQ Configurable in 128 word increments from 128 to 16,384 words with Logicmaster and from 128 to 32,640 words with Control version 2.2.
System Registers (for reference table viewing only; cannot be referenced in logic program) 28 words (%SR)
Timers/Counters >2,000
Shift Registers Yes đại lý IC693CPU364 | nhà phân phối IC693CPU364 | ge IC693CPU364
Built-in Serial Ports 1 (uses connector on PLC Power Supply). Supports SNP/SNPX slave. Requires CMM module for SNP/SNP-X master, RTU slave, or CCM; PCM module for RTU master support.
Communications Ethernet (internal) – AAUI or 10BASE-T. AAUI requires external transceiver.  10BASE-T is direct.
Ethernet (additional) – Supports Ethernet option modules.
LAN-Requires option modules for Genius, Profibus, FIP.
Override Yes
Battery Backed Clock Yes
Interrupt Support Supports the periodic subroutine feature.
Type of Memory Storage RAM and Flash
PCM/CCM Compatibility Yes
Floating Point Math Support Yes, firmware-based

 

Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *